User jamal shahverdiev shows us how to get FreeBSD connected to your CISCO 3700 router via TACACS+. Follow the link below for full instructions.

TACACS+ – (Terminal Access Controller Access Control System plus) — is a session protocol developed by Cisco.

Security(encryption) of the Protocol has improved. TACACS+ is a separately handles authentication, authorization, and accounting (AAA) services.

Used resources:

1. FreeBSD 9.2 x64 (VM, IP: 10.0.0.10)
2. GNS3 (Router 3700, IP: 10.0.0.100)
3. Windows LoopBACK_Adapter (IP: 10.0.0.1)

Flow structure will be as follows:
FreeBSD x64 10.0.0.10 => LoopBACK Adapter (10.0.0.1) => GNS Cloud => Cisco Router 10.0.0.100

Full instructions: http://www.unixmen.com/freebsd-tacacs-gns3-and-cisco-3700-router/

 

Check out this guide from Colin Percival, on how to get FreeBSD set up on your EdgeRouter lite. Follow the link below for full instructions.

I recently bought an EdgeRouter Lite to use as a network gateway; I had been using a cheap consumer wifi/NAT device, but I wanted the extra control I could get by running FreeBSD rather than whatever mangled version of Linux the device came with. Someone wrote instructions on installing FreeBSD onto the EdgeRouter Lite two years ago, but they rely on using the serial port to reconfigure the boot loader — perfectly straightforward if you have a serial cable and know what you’re doing, but I decided to take the opportunity to provide a more streamlined process.

Required:

• An EdgeRouter Lite.
• A small Phillips (“plus”) screwdriver.
• Another system running FreeBSD.

Full tutorial: http://www.daemonology.net/blog/2016-01-10-FreeBSD-EdgeRouter-Lite.html

Thanks to DragonFly BSD Digest for the link.